Forklift Training Course Red Deer

Forklift Training Course Red Deer - Federal and industry regulators have established the criteria for forklift safety training according to their existing standards and regulations. Individuals wishing to use a forklift should complete a forklift training program prior to utilizing one of these machinery. The accredited Forklift Operator Training Program is designed to offer trainees with the practical skills and knowledge to become an operator of a forklift.

There are forklift operation safety regulations which should be followed pertaining to pre-shift checks, and rules for lifting and loading.

Prior to a shift starting, an inspection checklist must be done and given to the Supervisor or Instructor. If whichever maintenance issue is discovered, the machine should not be operated until the issue is dealt with. To indicate the machinery is out of service, the keys should be removed from the ignition and a warning tag placed in a location that is seen.

Safety regulations for loading would consist of checking the load rating capacity on the forklift to know how much the machinery could handle. When starting the machinery, the forks should be in the down position. Keep in mind that there is a loss of around 100 pounds carrying capacity for every one inch further away from the carriage which the load is carried.

To be able to safely lift a palletized load, drive the forklift to the pallet and halt with the fork three inches from the load. Level the mast until it is at right angles to the load. Raise the forks to one inch below the slot on the pallet and drive forward. After that lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk to warn other personnel. Do not allow forks to drag on the ground.

The load should be loaded by the forklift in such a way that ensures the load is secure and will not create a hazard to other people or objects. Restraining loads is required for materials that can shift during transport and destabilize the forklift.

To be able to prevent the shifting of drums, drums could be strapped together to lessen movement. Forklift operators must drive slowly when moving liquids, to reduce instability in the forklift.

Click to Download the pdf