Forklift Training School Red Deer

Forklift Training School Red Deer - Forklift Training School - For The Safety Of Both The Machinery And The Operator - Federal and industry regulators have established the criteria for forklift safety training based on their existing regulations and standards. Those wanting to operate a forklift should finish a forklift training School prior to working with one of these machinery. The accredited Forklift Operator Training Program is designed to offer trainees with the information and practical skills to become a forklift operator.

Vehicle and Mobile Equipment safety regulations that apply to forklift operation include pre-shift inspections, and rules for loading and lifting.

An inspection checklist should be carried out and given to the supervising authority prior to beginning a shift. When a maintenance issue is uncovered, the use of the particular machine should be stopped until the problem has been dealt with. To indicate the equipment is out of order, the keys should be removed from the ignition and a warning tag placed in a location that is seen.

Safety regulations for loading would include checking the load rating capacity on the forklift to determine how much the equipment could handle. When starting the machinery, the forks should be in the downward position. Bear in mind that there is a loss of approximately 100 pounds carrying capacity for every inch further away from the carriage that the load is carried.

In order to safely lift a palletized load, drive the forklift toward the pallet and halt with the fork three inches from the load. Level the mast until it is at right angles to the load. Raise the forks to an inch below the slot on the pallet and drive forward. After that lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk in order to alert other staff. Never allow forks to drag on the ground.

Click to Download the pdf